Image credit: Brita
Table of Contents
How to reset Brita filter indicator after changing filter
👉 Have you replaced the Brita filter with a new filter and want to reset the Brita filter indicator?
👉 Are you having difficulty resetting the Brita filter indicator?
👉 Do you want to learn how to reset the Brita filter indicator after changing filter?
If the answer to all or any of the questions is yes, then raise your hand ✋because you are in the correct place.
In this blog post, we will share a step-by-step guide on how to reset Brita filter indicator after changing filter.
The EPA regulates over 80 contaminants, like arsenic and e-coli, in public water systems, with 90% meeting standards. To ensure water safety, you may use a water filter.
That’s why many people in the world use Brita Filters; it is one of the most popular brands for manufacturing high-quality pitchers, dispensers and bottles.
How Often Should We Replace the Brita Water Filter? It depends on the quality of the water and the quantity of water used daily.
But a question arises that how to reset the Brita filter indicator after replacing the filter. So, we are answering this question step by step here.
Brita provides three types of indicators in its dispense and pitchers.
- Pitchers WITH Max Fill Line
- Pitchers WITHOUT Max Fill Line
- Sticker Filter Indicator
We are now sharing with you a step-by-step guide on how to reset Brita filter indicators of three different styles of filter indicators.
How to reset the indicator of Pitchers WITH Max Fill Line
In this type of pitchers, there is a line to show the maximum amount of water that can be filled.
The filter gets activated when the pitcher lid is opened for 5 to 8 seconds (based on size of reservoir) and measures water use by counting the number of times the reservoir is filled.
A blinking green light on the pitcher after changing the filter is indicating that the filter is fresh, while a blinking red light on the pitcher indicates that your filter has reached the end of its certified life.
Setup for Standard Filters (White) Indicator
Step-1
For reset the filter indicator, you press the STATUS button and hold it down for 2 Second, after that release the STATUS button.
All lights will blink simultaneously twice, after this the green light of the standard pitcher will blink three times, this shows that the indicator has been selected for the standard filter mode (40 gallons).
Step-2 (Avoid this step if you have done Step-1 correctly)
If you have accidentally selected the wrong mode on the pitcher, repeat the procedure step 1.
Step-3
The green light will blink whenever you fill the reservoir and close lid, indicating the filter is in good condition.
The indicator light in the pitcher will blink depending on your current filter status.
Step-4
You can check the status of the filter at any time by simply holding the status button for 1 second and then releasing it. The light corresponding to your current filter status will blink for 1 second.
Step-5
When 0% of the filter life remains, Then the red light on the indicator blinks
The red-light indicator tells us that the filter should be replaced.
Setup for Elite Filters (Blue) Indicator:
Step-1
If you are using the Brita Elite Filter (blue in color) then you press the STATUS button and hold it down for 6 Second,
Do not release until the green light next to Elite FILTER has blinked green three times by itself.
Now the pitcher is selected for Elite Filter mode (120 gallons).
Step-2 (Avoid this step if you have done Step-1 correctly)
If you have accidentally selected the wrong mode on the pitcher, repeat the procedure step 1.
Step-3
The green light will blink whenever you fill the reservoir and close lid, indicating the filter is in good condition.
Step-4
You can check the status of the filter at any time by simply holding the status button for 1 second and then releasing it.
The indicator light in the pitcher will blink depending on your current filter status.
Step-5
When 0% of the filter life remains, Then the red light on the indicator blinks
The red-light indicator tells us that the filter should be replaced.
How to reset the indicator of Pitchers WITHOUT Max Fill Line
There is no line indicating the maximum limit for filling water in this type of pitcher. You need to estimate the appropriate amount of water for optimal filtration.
The filter change indicator activates every time you add water, and measures water usage based on 8 fl. oz. pours.
If the green light in the indicator is blinking then the filter is in good condition, a yellow light indicates that the filter life span is soon to end, while a blinking red light in the indicator indicates that the filter should be replaced.
Step-1
First the reset button (on some models this is called the “status” button) located below the indicator light is pressed.
This button is released when the green light will blink.
Step-2
On electronic or volumetric fill models, the indicator light will blink whenever you fill the reservoir and close the fill lid; on volumetric fill models, the indicator light will blink every time you pour from the pitcher.
Step-3
When 0% of filter life remains, the red light on the indicator blinks.
The red-light indicator tells us that the filter should be replaced.
How to reset the indicator of Sticker Filter Indicator
The filter indicator lets you know when it’s time to replace your filter. The timing of your filter change is determined by the water usage in your home.
Changing the filter from time to time will not only give you clean water, but you will also experience great-tasting water.
Here are some additional resources that you may find helpful:
- Brita’s website: https://www.brita.com/
People also ask :
How do you reset the filter indicator on a Brita filter?
To reset the indicator, press the STATUS button and hold it down. If you use the Standard Filter (white), then hold it for 2 seconds so the green button blinks three times itself, and if you use Elite Filters, hold it for 6 seconds until the green button blinks three times itself.
Why is the red light on my Brita filter?
The indicator will display a red light when the filter’s life reaches the end of its certified life. So, we should change the filter for clean and tasty water. Â To reset the indicator after changing the filter, press the status button and hold it down.
Why is the filter light still on after replacing the filter?
This light indicates whether the water filter needs to be replaced or if it was put in incorrectly. The light may stay on until you manually reset it after replacing the water filter, depending on the model.
